• 济南铝木门窗
  • 济南铝木门窗
  • 济南铝木门窗
分类展示
行业新闻当前位置:首页--行业新闻

从哪几个方面分析门窗的高中档?

  目前门窗品牌产品众多,档次高低掺杂市场。作为消费者对其不同层次的区别知之甚少。告诉我们今天如何与大家区分这扇门窗的中高档问题。以下主要从三个方面进行说明:
  At present, there are many brand products of doors and windows, and their grades are mixed with the market. As consumers, they know little about the differences of different levels. Tell us how to distinguish the middle and high grade of this door and window with you today. The following is mainly explained from three aspects:
  一、价格方面的差异,断桥铝合金门窗要比普通铝合金门窗贵很多;
  1、 In terms of price, aluminum alloy doors and windows are much more expensive than ordinary aluminum alloy doors and windows;
  断桥铝门窗的好坏,主要从:型腔设计、框架风机是否注胶、与玻璃连接处的密封、中空玻璃这几个方面来区别:
  The quality of bridge cutoff aluminum doors and windows is mainly distinguished from the following aspects: cavity design, whether the frame fan is injected with glue, sealing at the joint with glass, and hollow glass
  1. 型腔设计:高精度结构尼龙隔热条,隔热条与橡胶条接触,保证门窗的整体强度和精度,温度变化大,橡胶条不会变形,增加防水、防尘效果;
  1. Cavity design: high precision structural nylon heat insulation strip, which contacts with rubber strip to ensure the overall strength and accuracy of doors and windows, large temperature change, rubber strip will not deform, increasing the effect of water-proof and dust-proof;
  2. 帧是否球迷是否注射胶:外面有密封胶的粉丝,和角落的部分框架风机配备德国双组分注射glue-type角落技术,确保更加灵活开放,没有肿块,长时间使用后,没有角损失,保证使用寿命;
  2. Whether the frame fans inject glue or not: fans with sealant outside and some frame fans in the corner are equipped with German two-component injection glue type corner technology to ensure more flexible and open, no bump, no corner loss after long-term use, and ensure the service life;
  3.中空玻璃:玻璃的两面都用密封胶,不能用密封胶来保证玻璃与型材没有直接接触。
  3. Hollow glass: sealant shall be used on both sides of the glass. Sealant shall not be used to ensure no direct contact between the glass and profile.
  受力更均匀,不因气候和风压变化,而造成玻璃爆裂,更重要的是玻璃与型材接触更紧密,防水效果更好;
  The stress is more uniform, and the glass will not burst due to the change of climate and wind pressure. The most important thing is that the glass and profile contact more closely, and the waterproof effect is better;
  4. 中空玻璃:厚度大于5MM,中空层玻璃不小于12MM,玻璃表面无水纹,不泛绿,更安全,保护您的家人;隔音、隔热效果好、透明度高、采光好;
  4. Insulating glass: the thickness is more than 5mm, the insulating layer glass is not less than 12mm, the surface of the glass is free of water marks, not green, more safe, to protect your family; sound insulation, good heat insulation effect, high transparency, good lighting;
济南铝木门窗
  2、断桥铝合金门窗表层加抗氧化保护层;
  2. Add anti-oxidation protection layer on the surface of aluminum alloy doors and windows;
  将铝合金型材置于电解液中作为阳极,电解在其表面形成氧化铝膜的过程称为铝合金的阳极氧化处理。铝阳极氧化实际上是一个电解水的过程。在这个过程中,氧化铝膜的形成可以起到有效的抗氧化作用。
  The anodizing of aluminum alloy is the process that aluminum alloy profile is placed in electrolyte as anode and aluminum oxide film is formed on its surface by electrolysis. Aluminum anodizing is actually a process of electrolyzing water. In this process, the formation of alumina membrane can play an effective anti-oxidation role.
  三、断桥铝合金门窗工艺。
  3、 Aluminum alloy door and window technology for bridge breaking.
  断桥铝合金门窗型材国家标准:型材厚度应大于或等于1.4mm。其生产工艺也十分复杂,目前国内保温铝生产线,主要生产工艺是采用“辊内嵌式”,无论是引进国外还是国内设备,都是采用“三步法”生产工艺,即齿、通、辊。也有一些企业在研究“两步法”的生产程序时,会通过开带同步,但基本原理还是一样的,只是为了缩短工艺时间。
  National standard for profile of bridge cutoff aluminum alloy doors and windows: the thickness of profile shall be greater than or equal to 1.4mm. Its production process is also very complex. At present, the main production process of domestic thermal insulation aluminum production line is "roll in-line". Whether foreign or domestic equipment is introduced, the "three-step" production process is adopted, namely tooth, through and roll. There are also some enterprises in the study of "two-step" production process, they will synchronize through opening, but the basic principle is the same, just to shorten the process time.